![](https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEjIQZPnOYynMBkk8pOSQFJCMZtDlWOUlbegYMVlelrbemOCAgjHWbO9pbhpNdN8nuG1gXVR8560pfYokHO-7_O_owi6bRzcBOo9exLdGQXBbWRVJxlbI2p1ABbcDfPRZuaJkm1lAA/s320/controller0907.jpg)
While working on this, I decided to attach a cable holding hook to the side of the controller. Hopefully this will hold the power cord securely and prevent disconnects. Once I had the connector jiggle loose. I also hope it will be faster. Previously, I was unwrapping and wrapping a twist tie around the data and power cables...
I rejigged the North/South switch. Previously, I had a piece of Magic Tape over it to prevent accidental activation. Today, I jammed some plastic into the well of the switch and then put black electrical tape over top the hole. That switch can't move.
Another overdue item: I replaced the black twist ties on the power and data cords with orange Velcro One-Wraps (couldn't find my red ones).
Finally, with some red electrical tape, I attached the power connector and male adapter. Hopefully this will prevent disconnects. Never had an issue with this. I just want to avoid polarity problems...
No comments:
Post a Comment